Izdelki za 1 4 titanove cevi (33)

Tubes Titane

AMETEK Specialty Metal Products bietet eine breite Auswahl an Präzisionsrohren, die von seinen Tochterunternehmen Fine Tubes in Großbritannien und Superior Tube in den USA gefertigt werden.

Ti 3AI/2.5V (Titanium Grade 9) alloy is a near alpha, alpha-beta alloy, sometimes referred to as “half-6-4.” It offers 20 to 50% higher tensile strength than the commercially pure titanium at room and elevated temperatures. It is much more amenable to cold working than Ti 6AI/4V alloy and can be cold worked 75 to 85% to result in moderately high strength and good ductility. Furthermore, it is weldable as the commercially pure grades and has excellent resistance to torsion and corrosion.Ti 6Al/4V is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti. Amongst its many advantages, it is heat treatable. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):427 J/kg/°K Thermal conductivity:7.6 W/m/°K Thermal Expansion:7.9 μm/μm/°C Modulus Elasticity:107 Gpa Electrical Resistivity:12.6 μohm/cm Density:4.48 g/cm3

Herstellung von nahtlosen Titan-Rohren, Titan-Plasmateilen nach Zeichnung, Rohblöcken, Blechen etc. in verschiedensten Abmessungen u. Werkstoffen nach Spezifikation

AWH bietet neben seinem weiten Programm an Prozesskomponenten auch Rohre, Trägermaterial und Rohrschellen, die zur Rohrleitungsmontage benötigt werden an. Lieferumfang von Rohren und Rohrschellen: - Rohre DN10 - DN450 aus Edelstahl, DIN EN 10357, DIN EN ISO 1127, ASTM A269/270 und SMS: in den Ausführungen: innen und außen gebeizt, ungeglüht oder geglüht, innen gebeizt und außen geschliffen, ungeglüht oder geglüht - Vierkantrohre, Rechteckrohre, Quadratrohr und Hohlprofile außen metallblank oder geschliffen - Stabstahl und Blankstahl - Flachstahl - Winkelstahl ( Winkelprofil) - Rohrschellen / Halterungen für Rohre nach DIN, ISO, OD und SMS - Rohrträger - Rohraufleger Rohrspannbügel Gleitschellensysteme

Tube en inox 316, pour l'extérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 5 m Référence:0650.0500.6021 Matière:Inox 316 (Extérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur Diamètre tube:42,4 x 2 mm Longueur:5 mètres Section:Rond

Ons assortiment telt 15 000 artikelen, waaronder: RVS buizen 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541- Rondstaven van roestvrij staal 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 - Gelaste en niet gelaste buizen van roestvrij staal 904L 1.4539 UB6 - Massieve rondstaven van roestvrij staal UB6 904L 1.4539 - Vuurvaste buis en rondstaf 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex buizen UNS S31803 1.4462 - Super duplexbuizen UNS S32750 S32760 1.4410 1.4501- Massieve duplex- en super duplexrondstaven 1.4462 1.4410 1.4501 - Roestvrij plaatstaal 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541- Vuurvaste plaat 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplexplaten UNS S31803 1.4462 - Super duplexplaten UNS S32750 S32760 1.4410 1.4501- Platen van roestvrij staal UB6 904L 1.4539 - Buizen van legeringen 600; 601; 800; 825 - Hastelloy C276 - Buizen en platen 2.4816; 2.4851; 2.4856; 2.4360 - Flenzen van roestvrij staal duplex super duplex 904L UB6 1.4539

VISHAL STEEL INDIA is a leading worldwide supplier & exporter of Stainless Steel ASTM A312 / A213 / A249 304/304L Stainless Steel Seamless Pipes, Stainless Steel ASTM A312 / A213 / A249 304/304L Stainless Steel Welded Pipes, Stainless Steel ASTM A312 / A213 / A249 304/304L Seamless Pipes etc

Die Aluminiumwerk Unna AG hat sich auf die Herstellung von Rohren aus Aluminium spezialisiert. Die Rohre werden am Standort durch unsere Strangpressen hergestellt. Grundsätzlich können bei uns Rohre in zwei verschiedenen Herstellverfahren produziert werden: Nahtlos gepresst bzw. Kammergepresst. Man kann beide Verfahren relativ einfach unterscheiden. Bei dem nahtlosen Strangpressverfahren ist der Dorn für die Innenkontur des Rohres in dem Pressstempel fixiert. Bei dem Kammerpressen erfolgt die Befestigung des Dorns über Tragarme an der Matrize.

Weltweit einzigartig ist bei der Schierle Stahlrohre GmbH & Co. KG die Möglichkeit der Kombination aus dem Bezug von Stahlrohren und -stangen als Handelsware sowie von maßgeschneiderten Komponenten auf Kundenwunsch und nach Zeichnung für die verschiedensten Anwendungen. Das Produkt "Geschweißte Zylinderrohre (HPS)" weißt die folgenden Spezifikationen auf: Werkstoff: E235+C (St37-2 BK) bzw. E355+C (St52-3 BK) Toleranz AD: gem. EN10305-2 (DIN 2393) für kaltgezogene Rohre Toleranz ID: gem. ISO H9 - H10 (siehe Abmessungen) Rauigkeit: Ra max. 0,8 μm Geradheit: gerichtet auf 1 : 1.000 mm gemessen am Außendurchmesser Exzentrizität: gem. EN10305-2 (DIN 2393-1/-2) für kaltgezogene Rohre Herstellungslängen: 1,5 – 11 m Kompetenz in der Qualitätssicherung. Die Schierle Stahlrohre GmbH & Co. KG verfügt seit 1994 über ein Qualitätsmanagementsystem, das die Norm DIN EN ISO 9001:2008 erfüllt.

Alle unsere Carbon Präzisionsrohre sind im Wickelverfahren hergestellt und haben einen mehrlagigen Carbonfaser Aufbau mit unterschiedlichen Faserwinkeln.

Rohrleitungssystem aus hochwertigen NiroSan®-Pressfittings (Edelstahlfittings) mit einer Formteildichtung aus EPDM (Ethylen-Propylen-Dien-Kautschuk) und NiroSan®-Edelstahl-Rohren nach DVGW-Arbeitsblatt GW 541 bzw. DIN EN 10312. Alle NiroSan®-Edelstahlfittings werden aus den Werkstoffen 1.4404 / AISI 316L (Formteile aus Edelstahl) und 1.4408 (Gewindeteile, Edelstahl-Feinguss) gefertigt. Der Werkstoff enthält mindestens 2,3 % Molybdän und weist einen geringeren Kohlenstoffanteil als der konventionelle Werkstoff 1.4401 auf. Damit ist er nicht nur gleichwertig zu diesem Edelstahl, sondern überzeugt durch seine deutlich höhere Korrosionsresistenz. Das NiroSan®-Presssystem ist geprüft nach den DVGW-Arbeitsblättern GW 541 und W 534 und zugelassen von DVGW, ÖVGW, SVGW sowie allen namhaften europäischen Zertifizierungsstellen. Die NiroSan®-Serie 9000 ist auch in einer speziellen LABS*- und silikonfreien Ausführung mit EPDM-Dichtring und in einer separaten Verpackung erhältlich. O ring:EPDM Operating pressure:16 bar Operating temperature:-30 - 120 °C Dimension:15 - 108 mm

CNC Turning stainless steel 316 pipe Material:Stainless steel 316 Processing method:CNC Turning Surface treatment:clean and deburring

Valve mechanical shaft fittings,CNC machining.

Stainless steel grades cover a wide range of compositions which result in the generation of a variety of microstructures and mechanical properties. This group of alloys is useful for the replacement of mild steel in structures and components. Stainless Steel tubes manufactured by Fine Tubes have an excellent combination of corrosion resistance, metallurgical stability and formabilityStainless steels are favoured because they are very cost effective. They also have an excellent combination of corrosion resistance, metallurgical stability, formability, and are easily welded. Their fabrication characteristics, good mechanical properties and attractive finished appearance make high quality stainless steel tubing a popular choice in a range of industries. Please note that we have a minimum order value of £10,000.

21Cr-6Ni-9Mn is a high manganese nitrogen strengthened, austenitic stainless steel. It combines high strength in the annealed condition, excellent resistance to oxidation at high temperatures as well as good resistance to lead oxide and a high level of corrosion resistance at ambient temperatures. The alloy can be fabricated and formed much the same as type 304 and 316, and is readily wieldable. It remains nonmagnetic after severe cold work. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):500 J/kg/°K Thermal conductivity:14 W/m/°K Thermal Expansion:16.7 μm/μm/°C Modulus Elasticity:19.6 Gpa Electrical Resistivity:73 μohm/cm Density:7.83 g/cm3

Tube en inox 304 pour l'intérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 2 m Référence:0650.0200.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:1 mètre Section:Rond

Tube en inox 316, pour l'extérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 1 m. Ce tube inox est a utiliser en extérieur, pour fabriquer un poteau ou une main courante. Référence:0650.0100.6021 Matière:Inox 316 (Extérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur Diamètre tube:42,4 x 2 mm Longueur:1 mètre Section:Rond

Tube en inox 304 diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 5 m Référence:0650.0500.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:5 mètres Section:Rond

Das Rohrsortiment ist in Außendurchmessern von 0,15 bis 50,8 Millimeter sowie in Wanddicken von 0,05 bis 6,35 Millimeter erhältlich.

Tube en inox 304 diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 4 m Référence:0650.0400.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:4 mètres Section:Rond

Tube en inox 316, pour l'extérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 4 m Référence:0650.0400.6021 Matière:Inox 316 (Extérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur Diamètre tube:42,4 x 2 mm Longueur:4 mètres Section:Rond

Alloy 209 is a fully austenitic nitrogen strengthened stainless steel, having twice the yield strength and superior corrosion resistance at room temperature when compared to 316/316L or 317/317L stainless steels. This grade does not become magnetic when cooled to sub-zero temperatures or to a cold working process and has high resistance to sulphide stress corrosion cracking in both annealed and cold worked/ cold worked & aged form up to 30 HRc hardness. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):134 J/kg/°K Thermal conductivity:15.6 W/m/°K Thermal Expansion:16.2 μm/μm/°C Modulus Elasticity:199 Gpa Electrical Resistivity:82 μohm/cm Density:7.88 g/cm3

Alloys 304 (S30400) and 304L (S30403) stainless steels are variations of the 18 percent chromium – 8 percent nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family. High strength, excellent corrosion resistance and minimized carbon content make Alloy 304 and 304L Stainless Steels useful for applications where welding is required. Uses include architectural mouldings and trim, welded components of chemical, textile, paper, pharmaceutical and chemical industry processing equipment. Other advantages are its resistance to oxidation, excellent formability, ease of fabrication and cleaning, excellent strength to weight ratio and good toughness at cryogenic temperatures. For severely corrosive environments,the lower content of Type 304L is preferred because of its greater immunity to intergranular corrosion. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):500 J/kg/°K Thermal conductivity:16.2 W/m/°K Thermal Expansion:17.2 μm/μm/°C Modulus Elasticity:19.3 Gpa Electrical Resistivity:7.23 μohm/cm Density:8.0 g/cm3

Tube en inox 304 diamètre 48,3 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 3 m Référence:0660.0300.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:3 mètres Section:Rond

316LN (UNS S31653) is a low-carbon, nitrogen-enhanced version of Type 316 molybdenum-bearing austenitic stainless steel. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-rupture and tensile strength at elevated temperature. The nitrogen in Type 316LN adds additional resistance to sensitization in some circumstances. The nitrogen content of Type 316LN stainless steel also provides some solid solution hardening, raising its minimum specified yield strength compared to Type 316L stainless steel. Like Types 316 and 316L, the Type 316LN alloy also offers good resistance to general corrosion and pitting/crevice corrosion. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):485 J/kg/°K Thermal conductivity:16.3 W/m/°K Thermal Expansion:16.5 μm/μm/°C Modulus Elasticity:200 Gpa Electrical Resistivity:7.4 μohm/cm Density:7.99 g/cm3

Surgical Implant 316L is a double melted stainless steel, regarded as a medical grade, this stainless steel is melted to achieve high levels of purity and cleanliness. It has excellent resistance to both general and intergranular corrosion, and pitting and crevice corrosion. The double melting allows for superior surface finish. Surgical implant 316L Stainless Steel is our most commonly sold medical stainless steel. Beyond removing impurities, this process, in combination with the unique nickel and chromium content of 316, tends to facilitate the formation of the surface chromium oxide layer that makes stainless steel corrosion resistant. There is some belief that surgical implant 316L forms a more substantial surface layer, and that this plays a strong role in protecting the host body from reactions to the nickel content of the material. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):485 J/kg/°K Thermal conductivity:16.3 W/m/°K Thermal Expansion:16.5 μm/μm/°C Modulus Elasticity:200 Gpa Electrical Resistivity:7.4 μohm/cm Density:7.99 g/cm3

UNS NO8904, commonly known as 904L, is a low carbon high alloy austenitic stainless steel which is widely used in applications where the corrosion properties of AISI 316L and AISI 317L are not adequate. The addition of copper to this grade gives it corrosion resistant properties superior to the conventional chrome nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids. However, there is limited use with hydrochloric acids. It also has a high resistance to pitting in chloride solutions, a high resistance to both crevice and stress corrosion cracking. Alloy 904L performs better than other austenitic stainless steels due to the higher alloying of nickel and molybdenum. The grade is non-magnetic in all conditions and has excellent formability and weldability. The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):450 J/kg/°K Thermal conductivity:11.5 W/m/°K Thermal Expansion:15.8 μm/μm/°C Modulus Elasticity:190 Gpa Electrical Resistivity:9.52 μohm/cm Density:7.95 g/cm3

The high precision seamless tubes manufactured at Fine Tubes begin their journey as seamless tube extrusions, in a range of different sizes. This material is reduced in size several times until it gradually reaches the exact specifications our customers require. Each time we perform a reduction process, the tube needs to be cut, cleaned and heat treated before the next one can commence. Please note that we have a minimum order value of £10,000.

Aluminiumwerk Unna AG is specialised in the production of Aluminium tubes. The Aluminium tubes are extruded on site using two possible methods. These are either Seamless extrusion or Porthole extrusion. It is quite simple to distinguish between the two extrusion methods. In seamless extrusion, a mandrel is positioned and fixed inside the extrusion die, creating the inner contour of the tube. In porthole extrusion, the mandrel is fixed and is supported by a number of integral bridges affixed to the outer portion of the extrusion die.